Magna / Verada owners from TR 1991 - TS 1995 Discussion here.
Here is a little write up I did a while ago. Most of the Mitsubishi EFI engines, just like most fuel injected engines, have a problem in regards to oil and sludge build up at the throttle body. This is caused from the breather tube in the induction pipe breathing oily vapour. This will cause a...
Welcome. This will be the thread that contains all the simple and not so simple fixes or mods we all once didnt know how to do. It will contain no spam. Not no spam like in the "post your ride" thread but no spam. All of this information will be targeted to the 2nd gen magna/verada models, which...
For all of those who want to do the Twin Pot brake conversion..... What you will need 1. Twin pot calipers from a 2nd gen 2. Either Machined rotors or new ones (Preferred) 3. New pads for the twin pots 4. New brake hoses (will cover this later) 5. Some basic knowledge of what you are doing...
Well thanks dimi for taking the spotlight :P Just thought I'd show everyone what I've been wasting all my paychecks on for the last month. this is the JDM DOHC 3.5L Engine i purchased off KB. He gave me a price i couldn't refuse and the next week it was being shipped down. The stock 3.5L DOHC is...
Well, Its gone. So lets Start a new one! Also Some quick Rules.. 1. All new member's rides and existing member's rides such as latest pic or latest mods welcome. 2. No discussion posts. these may be deleted. Start a new thread or PM the AMC Member. 3. Post only your ride - no pics of other...
Genuine Mitsubishi Workshop Manuals for TR/TS Magna- KR/KS Verada available for download in PDF here. No zip or rar file problems (yay!) but PDF will require Adobe reader to view. Be patient as this is a huge download but well worth it (1312 pages). When download completes save to your hard drive...
After thinking that I've somehow fixed the ticking noise a number of times and never really knowing why I came across a page that said to rev from idle in neutral slowly to 3000 rpm over 15 secs and then letting it drop back to idle and keeping it there for 15 secs and repeating that cycle (up to...
I went to visit her at the workshop this morning and the engine is all in, new drive shafts, power steering hose, engine mounts, timing belts, and the wiring is now 50% complete. A hole was drilled into the firewall to fit the ecu. The readings on the old dash cluster were inacurrate so a new...
Hi all, I have just recently purchased a 1993 TR V6 Magna for the princely sum of $300 ( with a full tank of gas) The car is running but has been poorly maintained. I have brought a new timing set, water pump, spark pugs/leads, ect ect... I have removed the rocker covers to replace the...
Easy to replace? Do I have to take off the Plenum chamber to get to em? Cheers. Clarky.
Recently I experienced first hand a rather common failure for the Magna TR/TS. While heading home from class, we started to smell an unusual burning smell in the cabin, followed by some erratic behaviour from the automatic transmission. After 22 years or 240,000 kilometres, the Transaxle...
Recently had starter motor repaired & elec switch replaced in key ignition (switch from wreckers).Now will not start unless ignition is turned on & left turned on for about 30 mins before.After engine starts & car used, key must be turned back to ACC not to OFF position,for engine to start...
hey guys as some of you may have read in my profile i have a tr 2.6 with a pretty hot n/a engine. anyways been doing some thinking lately and want to boost it slightly to produce a bit more power. firstly thought of supercharging because i have heard only bad reports of the turboed 2.6 magnas....
in TRs without a clock is the wiring there or do i have to wire it up?? i got a clock from a TR today but i didnt see any wiring behind the blank off plate
Hi, I have never worked on my magna 3.0L V6 before but I need to as I have finally isolated a frustating coolant loss to the engine water pipe on the back of the water pump. It doesn't leak from the front of the pump but is showing a rusty stain from the valley at the rear of the water pump and...
I have a 4 cylinder injected manual 1993 Magna wagon with a very weird radio issue. AM and FM both work fine when the engine is NOT running with the ignition switch in either the "Acc" and "On" positions. However as soon as the engine starts, the FM stops working but the AM still works fine. I...
Hey all - given the $2K government grant thingy, and it being about $700 out of pocket, is it worth converting an old TS wagon to gas? Was going to go the donut tank in the spare wheel well option, with what i imagine will be a fairly basic and standard converter on the throttle body. any...
Anyone know if there are custom or colored Gauge/Tacho/Dial Panel's for 93' TR's? I'm after white, if anyone knows a store that sells them please let me know.
Ok guys.. A while ago as a few know magna buff, stagma, my dad and myself completed an efi conversion on my old 92 GLX magna wagon.. Well after wanting a verada for such a long time and not wanting a auto , i thought about doing a manual conversion very hard. Well my dad bought a 93 KS...
Hi guys, Just sold my KL GTVi over the weekend and I’m already having withdrawals. Bought a 2017 Aurion Sportivo a couple of months ago which is an awesome car, but I want something to fill my time and work on (as the Toyota is taken care of by the dealer and won’t break lol) I was thinkin...
Hi Guys I recently lost some files in a computer crash and my workshop TS Magna repair manual in PDF format that I originally downloaded off this site was one of my losses. I cannot find this file any where. Would appreciate help.:(
Hey all, I was wondering if I could get some advice about my Verada, First question is to do with my ABS, the car has sat for a few years and so I was going to flush out the brake fluid but I was wondering how to go about it with the ABS System? Will I need to take it to a dealer for a scan...
'91 Magna Elite Steering wheel Controls The Magna Elite uses an uncommon method for sending codes to the radio. Rather than a voltage divider, it uses an NEC microchip that is intended for infrared remotes. Because of this, it is easy to work with if you have the right tools. The remote wire is...
There are currently 33 users browsing this forum. (0 members & 33 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules